Print Page | Close Window

Measuring Tread Depth

Printed From: BMW Car Club Forum
Category: Specialist Q&A
Forum Name: Tyres
Forum Description: Ask your questions about tyres
URL: https://www.bmwccgbforum.co.uk/forum_posts.asp?TID=14603
Printed Date: 27 Mar 2026 at 2:29am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: Measuring Tread Depth
Posted By: Roger123
Subject: Measuring Tread Depth
Date Posted: 09 Jul 2017 at 12:38pm
Tyre is a Michelin Pilot Super Sport, 295/30ZR20 101Y.  The tyre has an asymetric pattern with the outer edge to the right of the picture.  Where should measurements be taken?




Measurements taken at A, B, and C are approximately 4+ mm.  However, D is a very narrow tread width pattern and is not as deep as the others so I'm seeing less than 3mm.  (Even when new, this was never as deep as the others).  Is the depth of D taken into account when deciding when the tyre has reached its minimum working (and legal) tread depth, or just A, B, and C ?




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net